HEMCO Gage

BENEFITS OF HEMCOchrome™ Gages

A proprietary-plating process

• GUARANTEED not to chip or peel for the entire wear life of the gage
• Made to last up to 4X longer, they do not corrode
• Built to the high side of the tolerance
• Less friction / less wear
• Calibration savings as they do not need to be re-calibrated as often
• They can be restored like new under the GageSaver program

Stock Thread Gages

• Standard UN, UNC, UNF, &l UNEF Series #0 to 4"
• Metric Series M1.6 to M39
• Pipe Gaging NPT, NPTF, ANPT, & BSPT
• STI Screw Thread Inserts

Special Thread Gages, All Thread Forms up to 16"

Thread Plugs, Rings, & Setting Plugs

Cylindrical Gages up to 16"

Cylindrical Plug & Ring Gages, Master Setting Discs, & Master Setting Rings

Fowler-Bowers Bluetooth XTH3 Holematic Pistol Grips

• Larger (10mm) easier-to-read swivel display
• Self centering heads
• USB connectivity and bluetooth
• Four preset memories
• Fixed anvils
• Resolution: 0.00005" /.001mm
• Range 0.080"—12" (2—300mm)
• To reduce hand fatigue, the travel of the Holematic trigger is adjustable for minimum over travel
• Tungsten carbide measuring faces on all 3-point heads from 0.5" (12.5mm) and up.
• Heads with special anvils available for threads, splines, slots, etc.
• Sizes over 0.500" (12.5mm) feature blind bore capability
• Setting rings included in all sets
• Includes UKAS certificates for all pistol grip, heads and rings
• Contact the Fowler Technical Department for special anvil applications.

Fowler-Bowers XT-Series Holemikes

The Fowler-Bowers range of mechanical two and three point bore micrometers are now available as XT extended travel holemikes, allowing a wide measurement range without the need to interchange anvils.

Special Features:

• Graduations 0.00025"
• 3-pt contact with tungsten carbide measuring anvils above .5"
• Blind bore measuring above .5"
• Ratchet stop for consistent measuring
• Non-removable anvils
• Extensions available for deep measuring
• Setting rings included in all sets
• Includes UKAS certificates for all Holemikes and setting rings
• Every gage is individually serialized

Fowler-Bowers XT-Series Holemike Sets

Fowler-Trimos V3, V4 & V5 Electronic Height Gages

The NEW Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments. Manufactured in their entirety in Switzerland, they guarantee a robust, precise and reliable product in the long run.

54-191-440-0

• Measuring ranges 400mm, 700mm and 1100mm
• Extremely easy to use
• "Black mask" display with user friendly functions
• Electronically adjustable measuring force 0.75/1.5 (N)
• Lithium-ion rechargeable batteries
• Vast range of accessories
• All adjustments possible without tools
• Cast iron base for optimal stability
• RS232 and USB interfaces
• Air cushion (V4 and V5 Only)
• Dual probe holders (V4 and V5 Only)
• Carriage displacement: Manual (V5 includes selectable manual or motorized carriage displacement )
• Measures heights, diameters, perpendicularity, centerlines, Min/Max/Delta
• Accessory measuring probes up to 340mm in length available and provide excellent repeatability
• Resolution: 0.00005"/0.001mm
• Repeatability (2s): 0.00008"/0.002mm (Ø 0.00016"/0.004mm)

All V Models Include:

• Charging unit
• Measuring insert with ruby ball Ø 4mm
• Probe holder elbow Ø 8mm
• Setting gage
• User's manual
• Test certificate

Twin Beam Dial Height Gages

52-174-212-0

• Separate digit counters register both upward & downward travel.
• Zero setting can be obtained throughout the gage's range.
• Coarse readings in .100" graduations: fine readings taken on indicator are .001"
• Dual chrome plated beams.
• Carbide-tipped scriber.
• Base is hardened, ground & lapped for maximum flatness.

Dial Cal Plus

52-008-050-0

• IP54 rated against fluid and debris
• Measuring range 0-6"/0-150mm
• 4-way measurement
• 0.100" per revolution
• Thumbroll for fine adjustment
• Carriage lock screw
• Heavy duty stainless steel frame - 4mm thick
• Adjustable bezel with lock
• Includes fitted case

Machinist Grade Dial Calipers

• 4-way measuring
• Solid stainless steel construction
• Silky smooth movement throughout
• .100"/2mm range per revolution
• .001"/.02mm reading dial face
• Tough shockproof gearing
• Supplied in shop-hardened case

Metric Rectangular Gage Block Set

• Grade Ø
• 87 piece set
• Constructed of a special steel of high carbon and chrome content, hardened to 65RC, ensures hard wear resistance and stability
• Manufactured under carefully controlled conditions to ensure maximum accuracy, parallelism and flatness
• Calibrated to Fowler specifications which meet or exceed ASME B89.1.9-2002
• Sets include certification traceable to the National Institute of Standards & Technology
• Surface finish: .4 millionths (.01 microns)
• Price includes fitted wood case

Order No. 53-671-053-0

SHOP-BLOX^® Rectangular Gage Block Sets

53-672-081-0

• Manufactured to meet N.I.S.T. Federal Specification ASME B89. 1.9 - 2002 tolerances on length for inch gage blocks
• Certificate of Calibration traceable to N.I.S.T.
• Tolerances to ±.00005"
• In high-quality fitted wood case
  

RULES

52-297-006-0

EZ-Read Black Face Rules

• Hardened stainless steel
• White easy-to-read microfine graduations against a black, non-glare finish

52-330-006-0

Golden Rules

• Titanium coated for superior wear resistance
• Non-glare finish=RC80
• Scratch resistant microfine graduations with excellent clarity and contrast
  

RIGID STEEL RULES

FLEXIBLE STEEL RULES